Skip to content

Chapter 14: CHAPTER XII. Curvature of curves

14.1 CHAPTER XII. Curvature of curves

RETURNING to the process of successive differentiation, it may be asked: Why does anybody want to differentiate twice over? We know that when the variable quantities are space and time, by differentiating twice over we get the acceleration of a moving body, and that in the geometrical interpretation, as applied to curves, StartFraction d y Over d x EndFraction means the slope of the curve. But what can StartFraction d squared y Over d x squared EndFraction mean in this case? Clearly it means the rate (per unit of length x) at which the slope is changing-in brief, it is a measure of the curvature of the slope.

Fig. 31.
Fig. 31.
Fig. 32.
Fig. 32.

Suppose a slope constant, as in Fig. 31.

Here, StartFraction d y Over d x EndFraction is of constant value.

Suppose, however, a case in which, like Fig. 32, the slope itself is getting greater upwards, then StartStartFraction d left parenthesis StartFraction d y Over d x EndFraction right parenthesis OverOver d x EndEndFraction, that is, StartFraction d squared y Over d x squared EndFraction, will be positive.

If the slope is becoming less as you go to the right (as in Fig. 14, p. 80), or as in Fig. 33, then, even though the curve may be going upward, since the change is such as to diminish its slope, its StartFraction d squared y Over d x squared EndFraction will be negative.

Fig. 33.
Fig. 33.

It is now time to initiate you into another secret-how to tell whether the result that you get by "equating to zero" is a maximum or a minimum. The trick is this: After you have differentiated (so as to get the expression which you equate to zero), you then differentiate a second time, and look whether the result of the second differentiation is positive or negative. If StartFraction d squared y Over d x squared EndFraction comes out positive, then you know that the value of y which you got was a minimum; but if StartFraction d squared y Over d x squared EndFraction comes out negative, then the value of y which you got must be a maximum. That's the rule.

The reason of it ought to be quite evident. Think of any curve that has a minimum point in it (like Fig. 15, p. 80), or like Fig. 34, where the point of minimum y is marked upper M, and the curve is concave upwards. To the left of upper M the slope is downward, that is, negative, and is getting less negative. To the right of upper M the slope has become upward, and is getting more and more upward. Clearly the change of slope as the curve passes through upper M is such that StartFraction d squared y Over d x squared EndFraction is positive, for its operation, as x increases toward the right, is to convert a downward slope into an upward one.

Fig. 34.
Fig. 34.
Fig. 35.
Fig. 35.

Similarly, consider any curve that has a maximum point in it (like Fig. 16, p. 81), or like Fig. 35, where the curve is convex, and the maximum point is marked upper M. In this case, as the curve passes through upper M from left to right, its upward slope is converted into a downward or negative slope, so that in this case the "slope of the slope" StartFraction d squared y Over d x squared EndFraction is negative.

Go back now to the examples of the last chapter and verify in this way the conclusions arrived at as to whether in any particular case there is a maximum or a minimum. You will find below a few worked out examples.

(1) Find the maximum or minimum of

(a) y equals 4 x squared minus 9 x minus 6;

(b) y equals 6 plus 9 x minus 4 x squared;

and ascertain if it be a maximum or a minimum in each case.

(a) StartFraction d y Over d x EndFraction equals 8 x minus 9 equals 0 semicolon x equals 1 and one eighth, and y equals negative 11.065 period

StartFraction d squared y Over d x squared EndFraction equals 8; it is +; hence it is a minimum.

(b) StartFraction d y Over d x EndFraction equals 9 minus 8 x equals 0 semicolon x equals 1 and one eighth semicolon and y equals plus 11.065. StartFraction d squared y Over d x squared EndFraction equals negative 8 semicolon it is minus semicolon hence it is a maximum.

(2) Find the maxima and minima of the function y equals x cubed minus 3 x plus 16. StartLayout 1st Row 1st Column Blank 2nd Column StartFraction d y Over d x EndFraction equals 3 x squared minus 3 equals 0 semicolon x squared equals 1 semicolon and x equals plus or minus 1 period 2nd Row 1st Column Blank 2nd Column StartFraction d squared y Over d x squared EndFraction equals 6 x semicolon for x equals 1 semicolon it is plus semicolon EndLayout hence x equals 1 corresponds to a minimum y equals 14. For x equals negative 1 it is -; hence x equals negative 1 corresponds to a maximum y equals plus 18.

(3) Find the maxima and minima of y equals StartFraction x minus 1 Over x squared plus 2 EndFraction. StartFraction d y Over d x EndFraction equals StartFraction left parenthesis x squared plus 2 right parenthesis times 1 minus left parenthesis x minus 1 right parenthesis times 2 x Over left parenthesis x squared plus 2 right parenthesis squared EndFraction equals StartFraction 2 x minus x squared plus 2 Over left parenthesis x squared plus 2 right parenthesis squared EndFraction equals 0 semicolon or x squared minus 2 x minus 2 equals 0, whose solutions are x equals plus 2.73 and x equals negative 0.73. StartLayout 1st Row 1st Column StartFraction d squared y Over d x squared EndFraction 2nd Column equals minus StartFraction left parenthesis x squared plus 2 right parenthesis squared times left parenthesis 2 x minus 2 right parenthesis minus left parenthesis x squared minus 2 x minus 2 right parenthesis left parenthesis 4 x cubed plus 8 x right parenthesis Over left parenthesis x squared plus 2 right parenthesis Superscript 4 Baseline EndFraction 2nd Row 1st Column Blank 2nd Column equals minus StartFraction 2 x Superscript 5 Baseline minus 6 x Superscript 4 Baseline minus 8 x cubed minus 8 x squared minus 24 x plus 8 Over left parenthesis x squared plus 2 right parenthesis Superscript 4 Baseline EndFraction period EndLayout

The denominator is always positive, so it is sufficient to ascertain the sign of the numerator.

If we put x equals 2.73, the numerator is negative; the maximum, y equals 0.183.

If we put x equals negative 0.73, the numerator is positive; the minimum, y equals negative 0.683.

(4) The expense upper C of handling the products of a certain factory varies with the weekly output upper P according to the relation upper C equals a upper P plus StartFraction b Over c plus upper P EndFraction plus d, where a comma b comma c comma d are positive constants. For what output will the expense be least? StartFraction d upper C Over d upper P EndFraction equals a minus StartFraction b Over left parenthesis c plus upper P right parenthesis squared EndFraction equals 0 for maximum or minimum semicolon hence a equals StartFraction b Over left parenthesis c plus upper P right parenthesis squared EndFraction and upper P equals plus or minus StartRoot StartFraction b Over a EndFraction EndRoot minus c.

As the output cannot be negative, upper P equals plus StartRoot StartFraction b Over a EndFraction EndRoot minus c.

Now StartFraction d squared upper C Over d upper P squared EndFraction equals plus StartFraction b left parenthesis 2 c plus 2 upper P right parenthesis Over left parenthesis c plus upper P right parenthesis Superscript 4 Baseline EndFraction comma which is positive for all the values of upper P; hence upper P equals plus StartRoot StartFraction b Over a EndFraction EndRoot minus c corresponds to a minimum.

(5) The total cost per hour upper C of lighting a building with upper N lamps of a certain kind is upper C equals upper N left parenthesis StartFraction upper C Subscript l Baseline Over t EndFraction plus StartFraction upper E upper P upper C Subscript e Baseline Over 1000 EndFraction right parenthesis where upper E is the commercial efficiency (watts per candle), StartLayout 1st Row 1st Column Blank 2nd Column upper P is the candle power of each lamp comma 2nd Row 1st Column Blank 2nd Column t is the average life of each lamp in hours comma 3rd Row 1st Column Blank 2nd Column upper C Subscript l Baseline equals cost of renewal in pence per hour of use comma 4th Row 1st Column Blank 2nd Column upper C Subscript e Baseline equals cost of energy per 1000 watts per hour period EndLayout

Moreover, the relation connecting the average life of a lamp with the commercial efficiency at which it is run is approximately t equals m upper E Superscript n, where m and n are constants depending on the kind of lamp.

Find the commercial efficiency for which the total cost of lighting will be least.

We have StartLayout 1st Row 1st Column upper C 2nd Column equals upper N left parenthesis StartFraction upper C Subscript l Baseline Over m EndFraction upper E Superscript negative n Baseline plus StartFraction upper P upper C Subscript e Baseline Over 1000 EndFraction upper E right parenthesis comma 2nd Row 1st Column StartFraction d upper C Over d upper E EndFraction 2nd Column equals StartFraction upper P upper C Subscript e Baseline Over 1000 EndFraction minus StartFraction n upper C Subscript l Baseline Over m EndFraction upper E Superscript minus left parenthesis n plus 1 right parenthesis Baseline equals 0 EndLayout for maximum or minimum. upper E Superscript n plus 1 Baseline equals StartFraction 1000 times n upper C Subscript l Baseline Over m upper P upper C Subscript e Baseline EndFraction and upper E equals RootIndex n plus 1 StartRoot StartFraction 1000 times n upper C Subscript l Baseline Over m upper P upper C Subscript e Baseline EndFraction EndRoot period

This is clearly for minimum, since StartFraction d squared upper C Over d upper E squared EndFraction equals left parenthesis n plus 1 right parenthesis StartFraction n upper C Subscript l Baseline Over m EndFraction upper E Superscript minus left parenthesis n plus 2 right parenthesis Baseline comma which is positive for a positive value of upper E.

For a particular type of 16 candle-power lamps, upper C Subscript l Baseline equals 17 pence, upper C Subscript e Baseline equals 5 pence; and it was found that m equals 10 and n equals 3.6. upper E equals RootIndex 4.6 StartRoot StartFraction 1000 times 3.6 times 17 Over 10 times 16 times 5 EndFraction EndRoot equals 2.6 watts per candle hyphen power period

Exercises X. (You are advised to plot the graph of any numerical example.) (See p. 258 for the Answers.)

(1) Find the maxima and minima of y equals x cubed plus x squared minus 10 x plus 8 period

(2) Given y equals StartFraction b Over a EndFraction x minus c x squared, find expressions for StartFraction d y Over d x EndFraction, and for StartFraction d squared y Over d x squared EndFraction, also find the value of x which makes y a maximum or a minimum, and show whether it is maximum or minimum.

(3) Find how many maxima and how many minima there are in the curve, the equation to which is y equals 1 minus StartFraction x squared Over 2 EndFraction plus StartFraction x Superscript 4 Baseline Over 24 EndFraction semicolon and how many in that of which the equation is y equals 1 minus StartFraction x squared Over 2 EndFraction plus StartFraction x Superscript 4 Baseline Over 24 EndFraction minus StartFraction x Superscript 6 Baseline Over 720 EndFraction period

(4) Find the maxima and minima of y equals 2 x plus 1 plus StartFraction 5 Over x squared EndFraction period

(5) Find the maxima and minima of y equals StartFraction 3 Over x squared plus x plus 1 EndFraction period

(6) Find the maxima and minima of y equals StartFraction 5 x Over 2 plus x squared EndFraction period

(7) Find the maxima and minima of y equals StartFraction 3 x Over x squared minus 3 EndFraction plus StartFraction x Over 2 EndFraction plus 5 period

(8) Divide a number upper N into two parts in such a way that three times the square of one part plus twice the square of the other part shall be a minimum.

(9) The efficiency u of an electric generator at different values of output x is expressed by the general equation: u equals StartFraction x Over a plus b x plus c x squared EndFraction semicolon where a is a constant depending chiefly on the energy losses in the iron and c a constant depending chiefly on the resistance of the copper parts. Find an expression for that value of the output at which the efficiency will be a maximum.

(10) Suppose it to be known that consumption of coal by a certain steamer may be represented by the formula y equals 0.3 plus 0.001 v cubed; where y is the number of tons of coal burned per hour and v is the speed expressed in nautical miles per hour. The cost of wages, interest on capital, and depreciation of that ship are together equal, per hour, to the cost of 1 ton of coal. What speed will make the total cost of a voyage of 1000 nautical miles a minimum? And, if coal costs 10 shillings per ton, what will that minimum cost of the voyage amount to?

(11) Find the maxima and minima of y equals plus or minus StartFraction x Over 6 EndFraction StartRoot x left parenthesis 10 minus x right parenthesis EndRoot period

(12) Find the maxima and minima of y equals 4 x cubed minus x squared minus 2 x plus 1 period